Paint Plus logo
  • Home
  • Why PaintPlus?
  • Which paint?
  • Colours
  • Our Products
  • Stories
  • Where to buy
+
  • Trade Resources
  • Residential Exteriors
  • Residential Interiors
  • Commercial Interiors
  • Commercial Exteriors

residential interiors

Surface Preparation

  • All loose material must be removed and surface damage or imperfections made good.
    Fill all cracks and nail holes, sand and wipe clean with a lint free cloth.

  • The surface must be clean, dry and free of contaminants.
    Areas with a build up of grime must be cleaned with sugar soap (or quality equivalent).

  • Previously Painted Enamel and Polyurethane -
    Lightly sand to remove gloss and clean with a lint free cloth.

Prep Coat

  • Paper Faced Plaster Board and Stopping Repairs -
    Apply one coat of Easy Sand. When dry, lightly sand and clean with a lint free cloth.

  • New Timber Joinery and Doors -
    Apply one coat of Quick Prep or Easy Sand. When dry, lightly sand and clean with a lint free cloth.

  • Masonry, Villaboard, Cementious Cladding -
    Apply one coat of Masonry Sealer.

Top Coat

  • Bathrooms, Laundries, Doors, Door Trim, Scocia and Window Frames -
    Clear Finish - apply three coats of AcryGlaze lightly sanding between coats if timber grain-raising occurs.
    Colour - apply two coats of ArmourGuard.

  • Walls -
    Colour - apply two coats of Easy Flow.

  • Ceiling -
    Colour - apply two coats of Ultra Matt or two coats of Ceiling Flat if light sources highlight surface imperfections.

Product specifications change from time to time and may differ from those published on this website. If you have any questions please contact us directly at the address below.

Copyright © 2021 Paint Plus Colour Systems Ltd.

Email: info@paintplusuk.com

Web Development by gardyneHOLT