All loose material must be removed and surface damage or imperfections made good.
Fill all cracks and nail holes, sand and wipe clean with a lint free cloth.
The surface must be clean, dry and free of contaminants.
Areas with a build up of grime must be cleaned with sugar soap (or quality equivalent).
Previously Painted Enamel and Polyurethane -
Lightly sand to remove gloss and clean with a lint free cloth.
Paper Faced Plaster Board and Stopping Repairs -
Apply one coat of Easy Sand. When dry, lightly sand clean with a lint free cloth.
New Timber Joinery and Doors -
Apply one coat of Quick Prep or Easy Sand. When dry, lightly sand clean with a lint free cloth.
Masonry, Villaboard, Cementious Cladding -
Apply one coat of Masonry Sealer.
High Traffic Areas, Wet Areas, Doors, Door Trim, Scocia and Window Frames -
Clear Finish - apply three coats of AcryGlaze lightly sanding between coats if timber grain-raising occurs.
Colour Finish - apply two coats of ArmourGuard.
Walls in Light Traffic Areas and Ceilings -
Colour - apply two coats of Easy Flow or Ultra Matt.